HydroxypropylMethylcellulose (HPMC) is a non-ionic cellulose ether. Due to its excellent physical and chemical properties and wide range of applications, it has become an important component of industrial and building materials. In order to give full play to the characteristics of HPMC, the correct use method is particularly important. This article will introduce the correct use of HPMC in detail from the basic characteristics of HPMC, dissolution methods, and usage skills in different application fields, to help users achieve the best results in practical application.
With competitive price and timely delivery, Haoshuo sincerely hope to be your supplier and partner.
Basic properties of HPMC
HPMC is a white or slightly yellow powder or granule with good water solubility, thickening, suspension, adhesion, emulsification, film-forming and protective colloid properties. The hydroxypropyl and methyl substituents in its molecular structure give it unique properties, allowing it to form a stable colloidal solution in aqueous solution with strong viscosity and rheological properties. It is precisely because of these properties that HPMC has been widely used in building materials, coatings, medicine, food, cosmetics and other fields.
Dissolution method of HPMC
Correctly dissolving HPMC is key to ensuring its optimal performance. Here are several common dissolution methods:
Cold water dispersion method
Slowly sprinkle HPMC into cold water and stir continuously until it is completely dispersed. At this point, HPMC will form a uniform suspension. Then, gradually heat it to an appropriate temperature to completely dissolve it and form a stable colloidal solution.
Hot water dissolution method
First, wet the HPMC with a small amount of hot water to form a paste. Then, dilute it with an appropriate amount of cold water and stir until it is completely dissolved. This method is suitable for occasions where quick dissolution is required.
Organic solvent dissolution method
In some special applications, HPMC can also be dissolved in organic solvents (such as ethanol, acetone, etc.). During the dissolution process, attention should be paid to the selection and amount of solvent used to ensure the solubility and stability of HPMC.
The correct use of HPMC in different fields
Building Materials
The main functions of HPMC in building materials are thickening, water retention, lubrication and improving construction performance. In dry mortar, putty powder, tile adhesive and other products, the correct usage of HPMC is as follows:
Dosage control: According to different products and construction requirements, the addition amount of HPMC is generally 0.1% to 1%.
Stir evenly: After fully mixing HPMC with other dry powder materials, add water and stir to ensure that it is evenly dispersed and completely dissolved.
Construction operation: During the construction process, pay attention to controlling the temperature and humidity to give full play to the water retention and adhesion of HPMC and improve the construction effect.
Coatings and inks
The main functions of HPMC in coatings and inks are thickening, suspension and emulsification. Its correct usage is as follows:
Dosage adjustment: According to the type and performance requirements of coatings and inks, the addition amount of HPMC is generally 0.1% to 2%.
Dispersion and dissolution: First moisten HPMC with an appropriate amount of solvent, then gradually add it to the coating or ink and stir continuously until it is completely dissolved and evenly dispersed.
Coating operation: During the coating process, pay attention to controlling the temperature and humidity to avoid sedimentation, stratification and other problems to ensure the uniformity and stability of the coating.
Medicine and food
HPMC is mainly used as a thickener, suspending agent, film-forming agent and stabilizer in medicine and food. Its correct usage is as follows:
Dosage control: According to the formulation and performance requirements of medicines and foods, the addition amount of HPMC is generally 0.1% to 5%.
Dissolution treatment: First moisten HPMC with an appropriate amount of water or solvent, then gradually add it to the medicine or food, and stir continuously until it is completely dissolved and evenly dispersed.
Processing operation: During the processing, pay attention to controlling the temperature and humidity to avoid problems such as gelation and agglomeration to ensure the uniformity and stability of the product.
cosmetic
HPMC is mainly used as a thickener, film former and moisturizer in cosmetics. Its correct usage is as follows:
Dosage adjustment: According to the type and performance requirements of the cosmetics, the addition amount of HPMC is generally 0.1% to 2%.
Dissolution treatment: First moisten HPMC with an appropriate amount of water or solvent, then gradually add it into the cosmetics and stir continuously until it is completely dissolved and evenly dispersed.
Production operation: During the production process, pay attention to controlling temperature and humidity to avoid problems such as stratification and sedimentation to ensure the uniformity and stability of the product.
Precautions
When using HPMC, you should also pay attention to the following points:
Storage conditions: HPMC should be stored in a dry, cool, ventilated place, away from moisture and high temperature to prevent its performance from being affected.
Want more information on hpmc powder? Feel free to contact us.
Solution stability: During long-term storage, HPMC solution may experience problems such as decreased viscosity and discoloration. Therefore, it is recommended to prepare and use it immediately to ensure its stable performance.
Environmental impact: HPMC has little impact on the environment, but during use, care should be taken to prevent dust from flying to avoid adverse effects on human health.
In short, the correct use of HPMC can not only give full play to its superior physical and chemical properties, but also improve the performance and quality of various products. By mastering the basic characteristics of HPMC, dissolution methods and usage skills in different application fields, users can achieve the best results in practical applications. Our factory will continue to be committed to the research and development and production of HPMC, provide customers with high-quality products and services, and promote the development and progress of various industries.
Previous Article: What is the maximum temperature that Hydroxypropyl Methylcellulose can withstand? Analysis of HPMC's high temperature resistance and application
Are you searching for a reliable HPMC supplier to meet your business requirements? With so many options in the market, selecting the right Hydroxypropyl Methylcellulose (HPMC) supplier can be challenging. However, making the right choice is essential for ensuring product quality, supply consistency, and cost-effectiveness.
HPMC is a versatile material used in various industries, including construction, pharmaceuticals, food, and cosmetics. Finding a supplier that provides high-quality HPMC, reliable delivery, and excellent customer service is key to your business success.
Key Factors to Consider When Choosing an HPMC Supplier
1. Quality Standards
Always choose a supplier that sources premium raw materials and follows advanced manufacturing processes. A robust quality control system ensures the consistency and purity of HPMC products.
2. Industry Certifications
A reputable HPMC supplier should have certifications from recognized organizations, such as:
✔ ISO Certification – Ensures quality management systems compliance
✔ FDA Approval – Essential for pharmaceutical and food applications
✔ GMP (Good Manufacturing Practices) – Indicates high manufacturing standards
These certifications validate the supplier’s commitment to meeting industry standards and delivering safe, high-quality products.
3. Production Capacity & Supply Reliability
Your supplier must have the production capacity to meet your business demands, especially during peak seasons. Delays in supply can disrupt operations, so it’s crucial to verify their manufacturing output and delivery track record.
4. Customization Options
If your business requires custom HPMC formulations, look for a supplier offering tailored solutions. Some industries—like pharmaceuticals and construction—demand specific viscosity grades or functional modifications. A flexible supplier who can meet these needs gives you a competitive edge.
5. Customer Support & After-Sales Service
Reliable customer service is essential for smooth communication and issue resolution. Choose a supplier that offers:
✔ Responsive support for inquiries and orders
✔ Technical assistance for product applications
✔ Efficient logistics and after-sales service
A supplier with a strong customer focus ensures hassle-free transactions and long-term cooperation.
Final Thoughts: Partner with a Trusted HPMC Supplier
Choosing the right HPMC supplier is crucial for maintaining product quality, supply reliability, and cost efficiency. Take the time to research and compare suppliers before making your decision.
Why Choose LANDU as Your HPMC Supplier?
At LANDU, we are a leading HPMC manufacturer with years of industry experience. We provide:
✅ High-quality HPMC with strict quality control
✅ Industry-certified products for various applications
✅ Competitive pricing and reliable supply chain
✅ Excellent customer service & technical support
Comments
Please Join Us to post.
0