Tariff Concession Orders - Australian Border Force

DRILL RIGS, UNDERGROUND MINING, hydraulic top hammer AND/OR 
pneumatic in hole hammer, self-propelled, articulated, having 
BOTH of the following:
  (a) hole drilling diameter NOT less than 48 mm and NOT greater
      than 178 mm ;
  (b) diesel engine

CORE DRILLING RIGS, UNDERGROUND MINING, having BOTH of the 
following:
  (a) depth capacity NOT greater than 1 300 m;
  (b) feed frame length NOT greater than 1.8 m

DRILLING RIGS, HYDRAULIC TOP-HAMMER, LONG HOLE, wheel mounted,
 4 wheel drive, diesel engine, drill bit diameter in the range
 51 mm to 115 mm, having ALL of the following:
   (a) 30 degree forward to 30 degree backward angle drilling;
   (b) hole depth NOT exceeding 51 m;
   (c) 360 degrees rotary actuator,
 but NOT including core sample drilling machines

DRILLING RIGS, underground, rock rotary and percussive, but NOT
 including ANY of the following:
   (a) drilling machines (down the hole hammer or in the hole
       hammer);
   (b) top drive rotary drilling machines;
   (c) core and non-core drilling machines (diamond drills);
   (d) extension or shank rods when imported separately

DRILLING RIGS, UNDERGROUND MINING, self-propelled, diesel 
engine, having ALL of the following:
  (a) hydraulic boom;
  (b) drifter;
  (c) articulated four wheel drive;
  (d) electro-hydraulic drilling system;
  (e) cable reel

UNDERGROUND BORING AND DRILLING MACHINES, self-propelled, 
articulated, wheel mounted, having ALL of the following:
  (a) remote controlled crane;
  (b) articulated steering;
  (c) four wheel drive;
  (d) diesel engine;
  (e) hydraulic wrench;
  (f) computerised controls;
  (g) crane lifting capacity NOT greater than 2 000 kg;
  (h) crane overload protector;
  (i) raised angle drilling AND/OR boring length NOT greater
      than 250 m;
  (j) maximum drilling AND/OR boring diameter NOT greater
      than 1.5 m;
  (k) NOT greater than four wheels

DRILLING RIG, crawler mounted, top-hammer, having ALL of the 
following:
  (a) hole diameter NOT less than 75 mm and NOT greater than 
      128 mm;
  (b) hole depth NOT greater than 30 metres;
  (c) hydraulic rock drill;
  (d) carousel rod handling;
  (e) screw type air compressor having an output NOT greater 
      than 10.0 bar

DRILLING RIGS, BLASTHOLE, crawler mounted, rotary AND/OR down 
the hole type, single pass AND/OR multi-pass drilling, having 
ALL of the following:
  (a) maximum hole diameter NOT exceeding 420 mm;
  (b) maximum multi pass hole depth NOT exceeding 92 m;
  (c) maximum single pass hole depth NOT exceeding 21 m

DRILLING RIGS, UNDERGROUND, diesel engine, articulated, 
hydraulic, including BOTH of the following:
  (a) four wheel drive;
  (b) drilling diameter NOT less than 45 mm and NOT greater
      than 185 mm

SURFACE DRILLING RIGS, top-hammer OR down-the-hole, including 
ALL of  the following:
  (a) hole drilling diameter NOT less than 25 mm and NOT greater 
      than 229 mm;
  (b) diesel engines;
  (c) crawler tracks AND/OR wheels

SURFACE DRILLING RIGS, hydraulic, track AND/OR skid mountable, 
having a rotary drill with OR without ANY of the following:
    (i) rod handlers; 
   (ii) loaders;
  (iii) presenters