Form Tech Accessories.

Form Tech stocks many types of light and heavy formwork products and hardware from the most well-known manufacturers in the industry today. We focus on providing quality items that our customers recognize as being safe, reliable and economical. These quality products combined with our industry know-how allows us to provide for the regular, everyday needs of our customers while also being able to recommend solutions for many special applications.

If you want to learn more, please visit our website Zolo.

Wall Ties & Light Forming Hardware

We stock all types of wall ties and light forming hardware commonly used in today’s concrete forming industry. Hardware items may be purchased, but most are available on a rental basis.

• Steel-Ply Ties - Loop Ties, Flat Ties, Base Ties
• Waterseal Ties, Combination Coil/Loop Ties, Other Combination Ties
• All types of Steel-Ply hardware
• Long & Short End Snap Ties, Snap Tie Wedges, Jahn Brackets
• Gates Cam-Lock Brackets, Cam-Lock Ties
• Pencil Rod, Rod Clamps, Rod Tightening Wrenches
• Walkway Brackets, Turnbuckle Braces, Pipe Braces & Aligners

Heavy Tie Components

As a full line formwork supplier, we carry a complete line of heavy ties and related hardware. The re-useable hardware items may be purchased, but we offer nearly all of them on a rental basis also.

• Taper Ties, She-Bolts, Inner Units, Tie Plugs, Sure Plugs
• Plate Washers, Tie Plates, Swivel Tie Plates, Nut Washers, Battered Washers
• Coil Nuts, Coil Bolts, Coil Ties, Coil Rod, Coil Rod Couplers, Euro Rod, Wing Nuts
• Rebar Ties, Coil Anchors, Coil Inserts, Weld-On Toggle Ties, Angle Tie Brackets
• Lag Bolts, Rock Anchors, Speed Bolts/Nuts, Fit-Up Bolts/Nuts

Bridge Deck

Due to the varying beam types and sizes, the bridge deck hangers used to support the formwork are specific to each project. We’ll help you calculate the types, sizes and quantities of each hanger required. In addition, we can supply the proper overhang brackets for your application on a rental or purchase basis.

• Interior and Exterior Hangers
• Pres-Steel Hangers, Pres-Steel Half Hangers
• Coil Rod Hangers, Adjustable Joist Hangers
• Concrete Beam Hangers, Steel Beam Hangers
• Haunch Carriers, Fillet Clips
• Bridge Overhang Brackets

Plywood and Lumber

Every job requires at least some plywood and dimensional lumber, even when renting a complete formwork system. To further assist our customers with their formwork needs, we stock 3/4” plywood, dimensional lumber and scaffold plank. We’ll provide you with the items and quantities in our take-off so that you have a complete package when our shipment arrives at your jobsite.

• 3/4” BB-OES Plywood
• 3/4” B-Matte Plywood
• 1/2”, 5/8” and 3/4” HDO Plywood
• 2x4 and 2x6 Dimensional Lumber
• Laminated Scaffold Plank (OSHA Approved)

Brochure

Form Liner

Form Liners are available in a wide variety of patterns and are manufactured from either plastic or elastomeric materials depending on the number of reuses required. We represent the leading manufacturers in the industry and will work to provide you with not only the best form liner product for your application, but also the best supporting formwork design that reduces the amount of tie penetrations, seams and transitions so that you deliver the best finished product.

• Fluted & Fractured Rib, Masonry, Wood, Wood Plank, Stone, Rock, and Textured designs
• Most patterns are available in single-use, multi-use and extended use materials
• Liners are lightweight. Easy to handle and cut in field.
• Seamless, interlocking designs reduce grout leakage and improve appearance
• Custom designs available

Fiber Tubes

Single use fiber tubes provide a fast and economical way of forming round columns, footings, piers and pilings. The poly coated interior promotes easy stripping without the use of form release agents. Forms are available in a full range of diameters from 6” to 60” in both standard and seamless finishes.

• Lightweight, easy to handle forms for single use applications
• 12’ standard lengths are easily cut-to-size, bored or notched on the jobsite
• Improved water resistant paper shields form from adverse weather conditions
• Designed to withstand the full hydrostatic pressure load of concrete in a single pour
• Standard wall thickness for forms up to 12’-0”. Heavy wall thickness for forms over 12’-0”.
• Similarly constructed custom Void Forms with end closures available

Steel Flatwork Forms

Preferred by leading contractors, steel flatwork forms offer a wide range of adaptability plus many time and labor saving features. Steel forms are used by concrete contractors for driveways, sidewalks, parking lots, commercial floors, and light and heavy paving projects. In comparison with wood forms, steel forms greatly reduce setting and stripping costs and completely eliminate costly, recurring lumber purchases.

• Available in light weight and heavy duty designs
• Standard form heights range from 4” to 24”
• Only 3 stakes per 10’ form section required
• Flexible steel forms quickly handle curved areas
• Standard forms can be combined with special curb face forms, division plates, and related accessories to create full curb & gutter set-ups

Formwork is far more than a temporary mould for fresh concrete—it’s the backbone of any cast-in-place structure, dictating geometry, finish quality, jobsite safety and overall project economics. Whether you’re erecting a high-rise core, pouring a residential basement wall or crafting a complex architectural feature, choosing the right formwork system determines how quickly, safely and cost-effectively you’ll achieve the desired result. In this guide, we’ll explore:

• What formwork is and why it matters
• Main formwork types used worldwide
• Key benefits and trade-offs of each system
• Best practices for selection, installation, and maintenance

By the end, you’ll have the insights you need to align your next concrete project with the optimal formwork solution.

Formwork refers to the temporary structures—panels, supports and accessories—that contain fresh concrete until it develops sufficient strength to support itself and any imposed loads. Its four core functions are:

1. Shaping: Determines final geometry (slabs, beams, columns, walls).
2. Supporting: Resists hydrostatic pressure, dead loads and live loads during placement.
3. Finishing: Influences the surface texture and dimensional accuracy of the hardened concrete.
4. Access & Safety: Often incorporates working platforms, guardrails and lifting points to safeguard crews.

Because formwork can account for up to 30% of total project cost and 60% of concrete-related labor, optimizing your formwork strategy is paramount for on-time delivery, budget control and long-term performance.

Definition & Components

Engineered formwork—often called “system” formwork—consists of prefabricated panels, frames and standardized fittings manufactured from steel or aluminum. These panels are designed with precision-machined edges and integrated connection points (clamps, bolts or quick-release clips), allowing them to interlock quickly without on-site cutting or custom carpentry.

Key Elements

• Facing Panels: Smooth steel or aluminum sheets that define the concrete surface.

• Framing Rails: Rigid box-section members that support the panels and transfer load to the props.

• Connection Hardware: Factory-engineered clamps, wedges or pins that lock panels together with consistent pressure.

  Featured content:
  What Is Aluminum Honeycomb Panels Price? - PRANCE ceiling

  For more Formwork Accessoriesinformation, please contact us. We will provide professional answers.

• Bracing & Props: Adjustable shores, walers and cross-braces that secure the system and resist hydrostatic forces.

Advantages:

• Rapid assembly and dismantling
• Exceptional dimensional precision, yielding smooth, uniform finishes
• High reuse life (100–200 pours with proper care)
  

Considerations:

• Higher initial investment relative to timber
• Requires space for cleaning, storage and handling

Ideal for repetitive pours in high-rise cores, flat slabs and tunnel linings where cycle time and finish quality are critical.

Definition & Components
Insulated Concrete Forms (ICF) are hollow, interlocking blocks or panels made of expanded polystyrene (EPS), polyurethane or similar insulating materials. Once stacked and braced, they create a continuous form into which concrete is poured. After curing, the forms remain as permanent insulation on both sides of the wall.

Key Elements

• Insulating Panels/Blocks: EPS or polyurethane units with built-in webs or ribs to hold rebar and maintain cavity width.

• Alignment Connectors: Plastic or metal ties that lock the two wythes of insulation together and set rebar spacing.

• Reinforcement Cage: Steel rebar installed within the form cavity to meet structural requirements.

• Bracing & Leveling System: Adjustable shores and braces to keep forms plumb and aligned during pouring.

Advantages:

• Provides continuous thermal and acoustic insulation
• Speeds up installation and eliminates the need for stripping
• Improves airtightness and fire resistance

Considerations:

• Higher material cost and increased on-site storage volume
• Requires careful detailing at openings and penetrations

Best for energy-efficient residential walls, basements and low-rise commercial buildings aiming for green-building certification.

Formwork shapes more than just concrete—it shapes project performance, safety, quality and sustainability. By understanding the strengths and trade-offs of engineered, timber, insulated, plastic and decking systems—and by applying best practices in planning, procurement, training and upkeep—construction teams can deliver durable, high-performance structures that meet design intent, budget constraints and environmental goals.

Top 10 Common Construction Site Problems and How to Address Them

Introduction Construction sites are complex, fast-paced environments where numerous variables must be managed simultaneously. Site managers and contractors face a wide array of problems that

Read More »

What is Cuplock Scaffolding: Components, Uses, and Assembly?

Introduction In today’s competitive construction environment, speed, safety, and adaptability are paramount. That’s where Cuplock scaffolding comes in. Whether you’re building high-rise towers in urban

Read More »

The Ultimate Guide to Formwork in Modern Construction

Introduction Formwork is far more than a temporary mould for fresh concrete—it’s the backbone of any cast-in-place structure, dictating geometry, finish quality, jobsite safety and

If you are looking for more details, kindly visit Scaffolding Accessories.

Read More »