5/8 Inch SS201 Welded Wire Mesh Specifications and Buying Guide

5/8 inch SS201 welded wire mesh is made by joining stainless steel wires at their intersections, with a nominal mesh opening of 5/8 inch. That opening converts to 15.875 mm, but the finished clear opening can differ depending on wire diameter and whether the opening is measured between wire surfaces or from wire center to wire center. Before requesting a quote, confirm the opening measurement method, wire diameter, mesh dimensions, finish, and intended environment. We help buyers specify these details so suppliers can quote a mesh that fits the application rather than relying on the opening size alone.

You can find more information on our web, so please take a look.

Key Takeaways

• Confirm whether 5/8 inch refers to the clear opening or center-to-center spacing.
• Specify SS201 grade, wire diameter, mesh pattern, panel or roll dimensions, finish, and quantity.
• Assess corrosion exposure before choosing SS201; it may not be appropriate for every outdoor, marine, or chemical environment.
• Request a written specification and confirm tolerances, packaging, lead time, and shipping terms before placing an order.

Who This Buying Guide Is For

This guide is for distributors, fabricators, equipment manufacturers, and project buyers sourcing 5/8 inch SS201 welded wire mesh. It is also useful when a drawing, sample, or existing product identifies the opening but leaves other purchasing details unclear. The goal is to help you define a comparable specification and reduce avoidable differences between quotation, production, and delivery. Actual availability and production details should be confirmed with the supplier for each order.

What Is 5/8 Inch SS201 Welded Wire Mesh?

Basic construction and function

Welded wire mesh consists of longitudinal and transverse wires joined at their intersections, commonly by resistance welding. The resulting grid can provide separation, screening, guarding, or reinforcement, depending on its wire size, dimensions, and installation. SS201 identifies the stainless steel grade requested; it does not by itself define the mesh opening, wire diameter, finish, or allowable tolerances. Those details need to appear separately in the purchase specification.

A nominal 5/8 inch opening is 15.875 mm. In a real mesh, the clear space between adjacent wires is smaller than the center-to-center distance by the wire diameter, so the two measurement conventions are not interchangeable. If your drawing specifies a clear opening, state that explicitly and ask the supplier to confirm the finished opening and its tolerance. When matching an existing mesh, provide a sample or dimensioned drawing where possible.

Specifications to Confirm Before Buying

Mesh opening and wire diameter

Start by defining whether the mesh is square or rectangular and whether 5/8 inch applies in both directions. Then state whether the measurement is clear opening or wire-center spacing. Wire diameter influences the finished opening, mesh rigidity, weight, and material usage, so it should be quoted as a separate dimension rather than inferred from the mesh designation. If you have a required load, deflection, or screening performance, provide that requirement for technical review instead of assuming the opening alone determines suitability.

Material, finish, and product form

Specify SS201 as the required material and ask what material identification or documentation the supplier can provide for the order. Confirm the surface condition, such as a standard mill finish or another agreed finish, and state whether the mesh will be used as welded or undergo further fabrication. Also identify whether you need sheets, cut panels, or rolls, because product form affects handling, packing, and transport. Do not assume that every opening and wire-diameter combination is available in every format.

Applications and Material Suitability

Depending on the complete specification and design, 5/8 inch welded mesh may be considered for partitions, protective guards, equipment enclosures, storage fixtures, and general fabrication. The opening size can help define what may pass through the grid, while the wire diameter and frame design influence how the finished assembly behaves. These uses are examples, not a guarantee that one mesh specification is suitable for every load, safety, or regulatory requirement. For a load-bearing or safety-critical installation, have the complete assembly assessed by a qualified engineer.

Shunqiang Wire Mesh contains other products and information you need, so please check it out.

SS201 is often considered for applications where stainless steel construction is desired and the service environment is compatible with the selected grade. Corrosion resistance depends on exposure conditions, including moisture, salts, chemicals, cleaning practices, and temperature. For marine locations, persistent outdoor exposure, or chemical contact, ask a qualified materials specialist whether SS201 is appropriate or whether another alloy should be evaluated. A lower purchase price should not outweigh a mismatch between material and operating conditions.

How to Select and Request a Quote

A practical specification process

1. Define the job. Describe what the mesh will screen, protect, separate, or support, and identify any relevant load or safety requirements.
2. Set the opening convention. Specify 5/8 inch and state whether it is a clear opening or center-to-center measurement, plus whether the mesh is square or rectangular.
3. Choose wire and dimensions. Provide the required wire diameter, product width and length, and whether you need rolls, sheets, or cut panels.
4. Confirm material and finish. State SS201, the surface condition, and any documentation or identification requirements that matter to your project.
5. Share order and delivery information. Give quantity, packaging preferences, destination, and requested delivery schedule so the quotation can address logistics.
6. Review the quotation before approval. Check that it repeats the agreed specification, tolerances, quantity, price basis, lead time, and shipping terms.

Example inquiry format

You can structure a request as follows: “SS201 welded wire mesh, nominal 5/8 inch opening, clear opening measurement, square pattern, wire diameter to be confirmed, panels measuring 1,000 mm × 2,000 mm, quantity and finish as listed.” The panel dimensions in this example are illustrative only and do not represent a standard size or a guaranteed stock item. Replace them with your actual requirements, and include a drawing if edge condition, cut-outs, or fabrication details are important. If you are uncertain about wire diameter, ask the supplier to quote available options rather than leaving the parameter unstated.

Pricing, MOQ, and Lead Time

The price of a mesh order depends on the specified grade, wire diameter, opening, dimensions, product form, quantity, finishing or cutting requirements, and delivery arrangements. Minimum order quantity and production lead time can vary by specification and current production planning, so they should be confirmed in a written quotation. A standard-size item may be easier to source than a custom combination, but availability should not be assumed without confirmation. For a fair comparison, send the same complete specification to each supplier and compare the quotation terms as well as the unit price.

Supplier Evaluation Checklist

Ask the supplier to confirm the opening measurement convention, wire diameter, material grade, mesh dimensions, and tolerances in writing. Check whether they can support the requested product form, cutting, packing, and shipping requirements, and request available product documentation where needed. Clarify how changes or nonconforming dimensions will be handled before production begins. If you are buying for repeat orders, ask how the agreed specification will be recorded and referenced for replenishment.

How Shunqiang Wire Mesh Can Support Your Inquiry

At Shunqiang Wire Mesh, we work with B2B buyers sourcing welded wire mesh and can review the information needed to prepare a product quotation. Share your required SS201 grade, opening convention, wire diameter, dimensions, product form, quantity, and destination. If you have a drawing, target application, or existing sample, include it so the requirement can be assessed more clearly. We will confirm the applicable production and order details rather than treating unprovided specifications as standard.

Conclusion: Define the Full Specification Before Ordering

5/8 inch SS201 welded wire mesh is a useful purchasing description, but it is not a complete specification. The most important next step is to confirm whether 5/8 inch means clear opening or center-to-center spacing, then define wire diameter, pattern, dimensions, finish, quantity, and service environment. Review material suitability carefully where corrosion exposure or safety requirements are involved. Send these details to Shunqiang Wire Mesh to request a quotation based on your actual project needs.

If you are looking for more details, kindly visit 5/8 inch ss201 welded wire mesh.