4 Signs Your Vehicle Needs The Ball Joints Replaced | Capitol Toyota

May 5,

Check now

The suspension on your car is designed to keep your ride smooth and comfortable in the cabin, even over bumps and cracks in the road as you drive along. To do this, joints like ball joints in the suspension allow the wheels to articulate without transferring that motion to the cabin. However, over time, these joints can wear out. They can lose lubrication, come loose or seize up entirely. This will have a negative effect on the quality of your ride! Below, we've identified four important signs to watch for that indicate problems with the suspension on your vehicle, such as loose or worn-out ball joints.

Ball joints are one of the main parts of a vehicle’s suspension system.

They help with the operation of the suspension and steering systems, which is why it’s important to keep them in good condition.

But what is a ball joint, exactly?

Keep reading for more details about how these parts function, their importance to your vehicle and when they should be repaired or replaced!

Key Summary Points

• Ball joints are important components of a vehicle's suspension system that assist in the operation of the suspension and steering systems.
• They form a connection between control arms and steering knuckles, allowing for smooth movement within the suspension.
• There are upper and lower ball joints, with upper ball joints being non-load bearing and lower ball joints typically being load bearing.
• Ball joints will eventually wear out and need to be replaced, as the constant movement can cause them to become loose and develop space between the stud and socket.
• Signs of worn ball joints include excessive vibration, rattling or clunking noises, irregular tire wear and the vehicle pulling to one side.

Upper and lower ball joints

You can have upper or lower ball joints, depending on the type of vehicle and suspension. The difference is usually that upper ball joints are non-load bearing (also known as “followers”), while lower ball joints are typically load-bearing.

When To Make a Ball Joint Replacement

Given the role they play in the suspension system, ball joints are going to experience daily wear and tear. At some point, they need to be replaced.

The constant movement of the ball stud can cause it to become loose and move around inside the socket. As a ball joint wears out, more space develops between the stud and the socket.

The safety of everyone in your vehicle could be at risk if ball joints become too worn out. In severe cases, the stud can pull out of the socket and cause a wheel to become partially disconnected from the vehicle.

With competitive price and timely delivery, Zegao Machinery sincerely hope to be your supplier and partner.

Manufacturers often give specifications for the acceptable amount of space between the stud and the socket, which is good to familiarize yourself with. You can also watch for symptoms of worn ball joints, which include:

• Excessive vibration: Rattling and shaking that you can feel in the suspension or through the steering wheel can be a sign of wear and tear on the ball joints.
• Rattling or clunking noises: Ball joints that have become loose in their sockets have the potential to make all kinds of noises, including knocking, clunking or banging when going over bumps or turning.
• Irregular tire wear: Bad ball joints have the potential to cause uneven wear on the inside or outside of the tires.
• Car pulling to one side: A vehicle drifting to one side of the road could be a case of bad alignment, but it could also be a symptom of worn-out ball joints.
• It’s important to take your vehicle to a trained technician who’s qualified to diagnose and repair this part of your suspension!

Ball Joint FAQs

1. How long do ball joints typically last before needing replacement?

Ball joints typically last between 70,000 and 150,000 miles, depending on driving conditions and vehicle type. However, regular maintenance and timely inspections can help extend their lifespan.

2. What are the potential consequences of driving with a worn-out ball joint?

Driving with a worn-out ball joint can result in severe steering and suspension issues, potentially leading to loss of control of the vehicle. This can increase the risk of accidents and cause damage to other components of the suspension system.

3. Are there any DIY methods for checking the condition of ball joints?

Yes, one common DIY method is to lift the vehicle and try to move the wheel out of its normal plane. Excessive play could indicate a worn ball joint.

Additionally, you can visually inspect for grease leaks or damaged rubber boots around the joint. However, if you don’t have the expertise to perform these duties, it’s best to leave it to a professional (or become an industry pro yourself).

4. Are there any specific maintenance tips to prolong the lifespan of ball joints?

To prolong the lifespan of ball joints, regularly check for wear and tear and ensure they are properly lubricated. Avoid driving on rough or uneven surfaces when possible and follow recommended maintenance schedules for your vehicle.

Learn How To Repair Worn Ball Joints as an Automotive Technician

The Automotive Technology program at Universal Technical Institute (UTI) could help you gain the skills to diagnose and repair worn ball joints.

Not only will an education help when working on your own vehicle, you could also take the training you receive and apply it to an in-demand career in the industry.1 The Bureau of Labor Statistics projects more than 67,000 estimated average annual automotive technician job openings in the United States, according to the Bureau of Labor Statistics.41

UTI’s automotive program courses can teach you the fundamentals of repairing different parts of a vehicle, including steering and suspension service and repair. Hands-on labs and classroom learning combine to help give you the foundation of knowledge you need for an entry-level role in the field.18

Want more information on ball joint replacement? Feel free to contact us.