3/4 Inch SS201 Welded Wire Mesh: Specifications, Applications, and Buying Guide

3/4 inch SS201 welded wire mesh is a stainless steel grid made by welding wires at regular intersections, with a nominal mesh opening of 3/4 inch, or 19.05 mm. It can suit general-purpose screening, separation, guarding, and fabrication projects where a welded grid and a cost-conscious stainless steel option are priorities. Whether it is suitable depends on more than the opening size: wire diameter, sheet or roll format, exposure conditions, and required load performance must also match the application.

View Details

At Shunqiang Wire Mesh, we recommend confirming those details before requesting a quotation. This guide explains the specifications buyers should compare, where SS201 mesh may be appropriate, and what to include in a supplier inquiry. The dimensions discussed below are purchasing considerations, not a claim that every combination is a standard stocked item.

Key Takeaways

• A 3/4 inch opening is nominally 19.05 mm; confirm whether the requested measurement means clear opening or wire center-to-center spacing.
• SS201 is a stainless steel option for selected general-purpose environments, but the alloy should be checked against moisture, chemicals, and outdoor exposure.
• Wire diameter, panel or roll dimensions, finish, tolerances, and packaging all affect whether the mesh fits the project.
• Share an application description and a complete specification when requesting pricing, minimum order quantity, and lead time.

Who This Buying Guide Is For

This guide is intended for importers, distributors, fabricators, and project buyers evaluating 3/4 inch SS201 welded wire mesh. It is useful when a drawing specifies a 3/4 inch grid, or when a team needs to compare stainless steel mesh options for a fabricated assembly. It can also help buyers prepare a clearer request for quotation before committing to a material or order quantity.

What Is 3/4 Inch SS201 Welded Wire Mesh?

Welded wire mesh consists of longitudinal and cross wires joined at their intersections to form a grid. In this product description, “3/4 inch” refers to the nominal opening size, while “SS201” identifies the stainless steel grade requested. The mesh may be supplied as panels or rolls, depending on the specified dimensions, wire size, production capability, and order requirements.

One inch equals 25.4 mm, so a nominal 3/4 inch opening converts to 19.05 mm. Buyers should still confirm how the opening is measured: clear space between adjacent wires and center-to-center spacing are different dimensions. If the mesh must fit an existing frame or perform a defined screening task, state the measurement method on the drawing or inquiry.

Specifications to Confirm Before Ordering

Opening and Wire Diameter

Specify the opening as a nominal 3/4 inch or 19.05 mm and identify the measurement basis. Then confirm wire diameter in millimeters or another agreed unit. Wire diameter affects the mesh’s weight, stiffness, open area, and fit, so the opening size alone is not enough to judge suitability.

Do not assume that all 3/4 inch mesh uses the same wire diameter. If you have a sample, drawing, or existing product, provide it for comparison. For an initial visual check, buyers can request a 300 mm × 300 mm sample panel where sample production and shipping are available; this is a suggested inspection size, not a standard product dimension.

Grade, Finish, and Product Form

Confirm that the supplier is quoting SS201 rather than another stainless steel grade, and ask what material identification or documentation can accompany the order. Stainless steel grades do not perform identically in every environment, and SS201 should not be treated as universally suitable for corrosive exposure. Describe the expected contact with water, cleaning agents, salts, or industrial chemicals so the material choice can be reviewed.

With competitive price and timely delivery, Shunqiang Wire Mesh sincerely hope to be your supplier and partner.

Specify whether you need rolls or cut panels, along with the required width, length, edge condition, and packaging. Also clarify whether the finish should be as produced or meet another stated appearance requirement. If mesh will be cut, bent, welded, or attached to a frame after delivery, include those fabrication details in the inquiry.

Applications and Material Matching

Depending on wire diameter, dimensions, fabrication, and service conditions, 3/4 inch SS201 welded wire mesh may be considered for equipment guards, partitions, general-purpose racks, ventilation screens, and fabricated enclosures. The grid provides an open structure that can separate areas or support a protective barrier while allowing air and visibility through the mesh. These are potential uses, not a guarantee of performance for a particular design.

For screening, check whether the nominal opening can retain or pass the material involved, and account for particle shape and orientation. For guards or barriers, assess the full assembly—including the frame, attachment method, wire diameter, and expected force—rather than treating the mesh as a stand-alone load-rated component. For outdoor or washdown applications, review the environment and compare the grade with the project’s corrosion requirements before purchasing.

A Practical Selection Framework

1. Define the function. State whether the mesh is for screening, separation, guarding, or fabrication, and describe what it must retain, protect, or support.
2. Record the dimensions. Confirm the 3/4 inch opening measurement, wire diameter, overall sheet or roll size, and any permitted tolerances.
3. Review the environment. Note indoor or outdoor use, moisture, chemical contact, cleaning procedures, and other exposure conditions relevant to material selection.
4. Confirm conversion and fabrication needs. Identify cutting, bending, welding, framing, edge treatment, or other downstream processing that may affect the mesh specification.
5. Request a complete quotation. Ask the supplier to confirm material grade, available format, order quantity, packaging, price basis, production lead time, and any available inspection documents.

Pricing, MOQ, and Lead Time

There is no single price for 3/4 inch SS201 welded wire mesh because the specification and order conditions affect the quotation. Wire diameter, panel or roll dimensions, total quantity, finish requirements, packaging, and delivery destination are among the details a supplier may need. Minimum order quantity and lead time can also vary with the requested configuration and current production schedule.

For a useful comparison, request quotes using the same specification and quantity from each supplier. Ask whether the price is based on a panel, roll, area, or weight, and confirm which costs are included. If you are considering a trial order, ask whether a sample or small quantity is available and whether its production and shipping costs are quoted separately.

Supplier Evaluation Checklist

• Can the supplier confirm the requested SS201 grade and explain what material documentation is available?
• Does the quotation state opening measurement basis, wire diameter, dimensions, and product form?
• Can the supplier clarify tolerances, finish, edge condition, and packaging before order confirmation?
• Are MOQ, production lead time, shipping terms, and quotation validity clearly stated?
• Can the supplier review a drawing, sample, or application description before production?

Clear answers help reduce specification gaps, but buyers should retain their own project acceptance criteria and inspect incoming goods accordingly. If a dimension is critical, state its required tolerance rather than relying on an unstated assumption. Where documentation or inspection is required, agree on its scope before placing the order.

Work with Shunqiang Wire Mesh

At Shunqiang Wire Mesh, we support B2B buyers by reviewing mesh requirements and clarifying the details needed for a product quotation. Send us your required opening, wire diameter, SS201 material request, panel or roll dimensions, quantity, application, and destination. If you have a technical drawing or reference sample, include it so we can assess the requested configuration more accurately.

Conclusion: Is 3/4 Inch SS201 Mesh Right for Your Project?

3/4 inch SS201 welded wire mesh may be a practical option when a nominal 19.05 mm grid, welded construction, and SS201 material meet the project’s functional and environmental requirements. The opening size by itself does not establish strength, corrosion suitability, or fit, so verify wire diameter, measurement basis, format, and service conditions before ordering. The next step is to prepare a complete specification and request confirmation of price, MOQ, lead time, and available material documentation from your supplier.